The guideline stock quantity shown is what we aim to carry on stock, but is not necessarily exactly what we have in stock. We use this setting for items where keeping accurate stock levels between the website and our physical shop is difficult. If we cannot meet your requirement from the actual present stock, we will let you know ASAP along with a timescale of ordering. If we can cover your order from stock, it will be sent on your chosen delivery service as normal.
X

Bespoke Apertured Doors with Beading and Frame

Made to Measure

    N/A

    inc VAT
Model: MTMGDAMLF
Minimum Width: 1550mm Maximum Width: 3800mm
Minimum Height: 1815mm Maximum Height: 3120mm
  • MADE TO MEASURE ITEM
Minimum Width: 1550mm Maximum Width: 3800mm
Minimum Height: 1815mm Maximum Height: 3120mm

This item is a pair of made to measure timber garage doors and frame. Please enter your size requirement above to generate a price. You are specifying the external frame size above. The doors will be sized accordingly. This has the following specification:

Doors

  • Supplied unglazed. Suitable for single glazing only.
  • Pre-cut beading supplied with all sets.
  • Doors up to 2700mm will be done with 6 panes per door unless otherwise instructed and priced for. On wider sets, we will contact you before manufacture.
  • Manufactured from joinery grade kiln dried Scandinavian redwood pine.
  • The pictures above show garage doors with the horns still attached. The horns are the ends of the stiles that fly past the top of the doors. These horns are to be cut off during fitting.
  • 44mm thick stiles up to 3352mm wide and 56mm thick stiles above 3352mm wide; frame, ledged and braced construction.
  • 14mm thick matchboarding; 26mm thick backrails. Good solid construction.
  • Rebated meeting stiles. You can choose which door opens outward first as you look at the boarded side. Please state this in the notes as you check out. If you do not state which, we will assume right hand first.
  • To be side hung, usually with hooks and bands.
  • Viewed from the outside the right hand door opens outwards first before the left hand door opens.
  • If you require a frame or ironmongery please see our 'accessory' section.
  • Please see our range of standard off the shelf 'garage doors'. This item is unfinished and will need painting or staining. Correct and immediate treatment of this item is imperative.

Frame

  • 90x65mm frame jambs and head.
  • 44x20mm loose plant on stops, for you to form a rebate with.
  • Frame will be mortice and tenon jointed to the correct width. See the additional photos.
  • Frame supplied flat-packed for easy transport. 

Write a review

Please login or register to review
Int ref:Ron currie Gates/Garage doors Made to Order