The guideline stock quantity shown is what we aim to carry on stock, but is not necessarily exactly what we have in stock. We use this setting for items where keeping accurate stock levels between the website and our physical shop is difficult. If we cannot meet your requirement from the actual present stock, we will let you know ASAP along with a timescale of ordering. If we can cover your order from stock, it will be sent on your chosen delivery service as normal.
X

Cover Mould Pine decorative trim moulding 29x8mm 2.4m beading wooden timber

Clearance

Clearance

End of Line Item

This is an end of line item. This means it is only available in the quantity shown above. This may either be a clearance item, or stock at the end of its current design or price.

One Off Item
  • Model: CoverpineRB29x8
  • Units in Stock: 820
  • Supplied is one single length.
  • The length is 2.4m (94").
  • Dimensions of the section are 29mm x 8mm.
  • Made from pine.
  • This is a Richard Burbidge item - code of FB258.
  • Usually used internally to trim around wall panels and to use for other decorative areas.
  • Is bare natural timber, this will need to be suitably treated for the desired application.
  • Finger jointe din the length, seen on an additional image.
  • Other mouldings and trims are available in our shop.
  • We can offer a much cheaper delivery service by using MyHermes, but the maximum length that can be sent on this method is 1170mm. If you intend to cut these down into pieces shorter than 1170mm anyway, we can offer to cut these to use the cheaper postage service. Please email for a price.
  • Write a review

    Note: HTML is not translated!
        Bad           Good