The guideline stock quantity shown is what we aim to carry on stock, but is not necessarily exactly what we have in stock. We use this setting for items where keeping accurate stock levels between the website and our physical shop is difficult. If we cannot meet your requirement from the actual present stock, we will let you know ASAP along with a timescale of ordering. If we can cover your order from stock, it will be sent on your chosen delivery service as normal.
X

Brick Hanger Masonry Building Pre-Galvanised Steel Option Available

Item in Stock

In Stock item

This item is usually stock for ourselves. However, we can order more in.

Item In Stock
  • Model: SPMH/S
  • Units in Stock: 1990
  • More available to order. Enter quantity for more info.

  • The standard Single Piece Masonry Hanger is designed for building into brickwork or blockwork.
  • As standard all hangers are manufactured from 2.0mm thick pre-galvanised steel to BS EN 10346 : 2009, DX51D + G600 compliant with BS6178: Part 1:1990 and to the requirements of BS5268.
  • Wide top flange design offers increased loading capacity on masonry with a minimum crushing strength of 2.8N/mm2 and above. Hangers 150mm deep and over are manufactured 10mm less to allow for notching and regularisation of timber joists.
  • Hangers feature 75mm bearing surface and pre-punched side gussets to allow nail fixing into timber joists with 30 x 3.75mm sherardized square twist nails.

150mm:

  • Max Timber Width: 47mm.
  • Max Timber Thickness: 150mm.
  • Bearing Surface: 74mm.
  • For timber. 

200mm:

  • Max Timber Width: 47mm.
  • Max Timber Thickness: 200mm. 
  • Bearing Surface: 74mm.

Write a review

Note: HTML is not translated!
    Bad           Good