-
£100.00
inc VAT
Model: STRS
Bespoke Garden Decking Steps - 4 tread
We manufacture made to measure decking steps on our premises. They are suitable for any external use, e.g., decking areas, hot tubs, patios or caravans etc.. The treads and strings are made from pretreated 8x2" timbers which makes them extremely sturdy. The strings are properly trenched out to form grooves to receive the treads. As the strings are trenched as apposed to being cut out, they retain a lot of the strength given by the 8x2" timber. It is important to have each step the same rise height so as not to cause trips which we achieve by making the overall rise of the steps a multiple of the individual rise heights of each tread. Most other decking steps do not offer this feature. The price quoted is for 4 treads only and a maximum of 959mm wide. If you want a different quantity of steps, please message in for a quotation. This item is supplied in component form. The string ends need to be cut by yourself. Screws supplied.
What we need to know from you:-
Please message us with the following information.
- Overall vertical height, i.e., floor to floor.
- Overall width.
- Whether you want option 'A' or 'B'. See pictured diagram.
- Or do you want the below standard specification.
Standard specification:-
- Made with a rise per tread of 175mm.
- There are two ways to mount this product against your structure. Option 'A' gives an overall height of 875mm or option 'B' gives an overall height of 700mm. See the diagram in the additional pictures for a visual of the 2 options.
- Wooden decking steps, made from 195x45mm treated timbers.
- The overall overall width is approximately 950mm.
- Supplied in kit form with 2 strings and 4 treads.
- The stair strings are left as a longer length, you will need to cut the mitres/ends yourself to your ground and upper levels.
- Only the timber is supplied, you will need to get your own glue and fixings.
- For the timbers to last longer it is recommend that you seal all ends and cut outs with an appropriate end sealer. PVA glue is a good sealer.
- We can bespoke make this item to any size on request, with any number of treads and height, and to any width. Please email for a cost if you require this.
- Please note these decking steps don't comply to building regulations as an internal staircase.
For wider steps of say 1200mm and wider, we can machine a centre support as seen in the illustration photo. Please ask for price.
Installation instructions.
We supply 4no. x 80mm x M5 woodscrews per
tread.
- You will need a saw, adjustable bevel, square, pencil, sandpaper.
- Lightly, sand all the rough edges so they are free of spelching. Cut the ends of the strings so they create equal heights of rise between each tread. We recommend that the top tread is kept about 20mm away from the vertical surface you are fastening it to. This will leave enough timber on the string to locate the tread.
- End seal any end grain on the end of the treads and in the string trenches and ends.
- Slide the Treads into the pair of strings with the bigger rounded edges, on the treads, to the back.
- Screw 2 screws through the strings into each end of each tread. Each screw is to be positioned in the middle of each tread, 20mm from the edge.
