172mm Fire Check Door Casing

This particular product has the following specification.

• 30 minute fire rated.
• These casings are the highest quality for straightness, and small knots.
• They are produced in house to ensure the highest quality of machining.
• They are not notched.
• The overall width is 172mm x 44mm with a 47mm x 12mm rebate and groove.
• High quality softwood timber. 'unsorted' grade.
• The thickness at the front (rebate edge) is 32mm.
• The timber is 44mm overall.
• The listing is for one door casing only.
• All the casings have a rebate taken out off one corner, which is 47mm x 12mm. This will make the casings suitable for 44mm thick doors.
• Inside the face of the rebate is a groove for intumescent strips (not supplied).
• Intumescent strips and other accessories can be purchased separately from the shop.
• Supplied untreated so you are able to apply a similar finish to your doors.
• Door casings can be reduced in depth for a cost.
• You must ensure this is suitable for the fire door you are using it with, and meets the frame specification the fire door has been tested with.